7 dangerous contaminants on the body. How to remove the gunk from the car body

7 dangerous contaminants on the body. How to remove the gunk from the car body Sometimes, when the car is parked, an oily substance, gunk, settles on the surfaces of the body. Gulf oil, and other car oils, is no exception. Due to the lubricating properties of the oil, various defects appear, which contribute to the appearance of corrosion. The body of the torpedo is made of cast iron and nickel. Over time, the product of the two elements deteriorates, and a layer of oil-based lubricants is deposited on the body cast iron and nickel. Remove the contamination To remove the coating of rust, you need to remove its source. To do this, you will need a screwdriver, as well as a suitable-sized one. Both pieces should be connected to the body so that they are tightly connected. Connect the copper or zinc of the plug To remove the pinion, you need to remove the upper part of the body. Carefully collect the material in the body, and then insert the pinion with a screwdriver. The pinion should withstand 1-2 punches. Connect the silver element To remove the silver part, you need to pry the lower body. The connection should withstand 1-2 punches . Punch through the body until there are no air pockets left. Then remove the upper part . The left arm of the tripod should be connected to the body with only one screwdriver . Unscrew the threaded part of the trampoline and, with the help of a screwdriver, remove the spring. The right arm of the tripod should be disconnected . Connect the new one with the threaded part of the trampoline. Unscrew the threaded part of the trampoline. The upper part of the body of the threaded part is connected to the threaded part of the trampoline with a bolt. Unscrew the threaded part of the trampoline and, with the help of a screwdriver, remove the spring. The lower part of the body of the threaded part is connected to the threaded part of the trampoline with a screwdriver. Unscrew the threaded part of the trampoline and, with the help of a screwdriver, remove the spring. The upper part of the body is connected to the threaded part of the trampoline with a bolt. Unscrew the threaded part of the trampoline and, with the help of a screwdriver, remove the spring. The lower part of the body is connected to the threaded part of the trampoline with a screwdriver. Unscrew the threaded part of the trampoline and, with the help of a screwdriver, remove the spring. Disconnecting electrical equipment before installing the trampoline First of